Please contact us for larger quantity quotations sales@3dstoragesystems.co.uk

01924 635155

Total: £0.00

0

Your basket is currently empty.

12 Compartment Wire Mesh Locker - With & Without Doors

Code: WM30512COMP
Bright Zinc

Bright Zinc

Delivery leadtimes advertised for this product are subject to quantity restrictions and manufacturing capacity at time of order, please contact us for more information.

Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

£279.00 +VAT

£334.80 inc VAT

Select Extras

  • Fully assembled
  • High visual security
  • Hasp fitting for padlock locking (Padlock not included)Doors only.
  • Available with doors or without doors
  • Free UK mainland delivery to most areas orders over £150. Excludes Scottish postcodes.
  • Delivery to ground floor entrance or nearest offloading point*
  • BZP finish as standard.  Other paint colours on request at additional cost
  • MINIMUM ORDER QUANTITY 2 
  • Delivery: 12-20 working days

Request Callback

The 12 compartment wire mesh locker unit is ideal for schools or gyms to store shoes, bags or sporting kit.  You can have doors to secure the compartments, or you can choose to have no doors to create a pigeon hole compartment unit.

  • Overall height 1360mm
  • Overall Width 925mm
  • Includes 150mm high legs
  • 25 x 25 x 2.5mm wire mesh on 8mm rod frame
  • 4 Compartments high x 3 compartments in wide
  • Fixing brackets for wall or floor fixing included
  • 305mm deep or 450mm deep
  • Sloping tops available on request
  • BZP finish for resistance to water or paint finish to colour choice
  • Bespoke sizes available on request subject to quantity

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs or into lifts. Single driver Vehicle – Assistance will be required for off-loading of large orders.

*There is a minimum order quantity of 2 units. 

*Postcode Restrictions Apply: AB, BH, BN, BT, CT, DD, DT, EH, EX, FK, IV, KW, KY, PA, PH, PL, PO, SO, TN, TQ, TR

*Please contact us for pricing for delivery to any of the above postcodes which are an additional cost.

*Timed deliveries are on request - please contact us for pricing.

*Orders are delivered for handball offloading - if taillift is required, contact us for pricing.

*Carriage charges may apply for larger orders that require being palletised - please contact us.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
WM30512COMPWith 1360mm 915mm 305mm
WM30512COMPWithout 1360mm 915mm 305mm
WM45012COMPWith 1360mm 915mm 450mm
WM45012COMPWithout 1360mm 915mm 450mm
Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 12-20 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00. A £20.00 carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Dellivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 635155 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

});