We are fully operational, delivering and ready to take your order online or by phone 01924 635155

Cantilever ESD Workbench Kit G - With Extension Bench

Code: BC841275LLXX

£1420.39 +VAT

£1704.47 inc VAT

Select Extras

Other
RCD Circuit Breaker RCD Circuit Breaker

RCD circuit breaker (Residual-Current Circuit Breaker) instantly breaks an electrical circuit. Prevents serious harm caused by an electrical shock.

RCD Circuit Breaker

£68.07 ea
Wrist Strap for ESD Workbench Wrist Strap for ESD Workbench

Wrist strap comes with 10mm stud or 4mm banana. Can be attached to earth/ground lead to allow a safer path to ground. Advised that workers wear a wrist stap while working at the ESD bench.

Wrist Strap for ESD Workbench

£22.77 ea
Earth/Ground Lead with 3 Pin Plug Earth/Ground Lead with 3 Pin Plug

Provides a safe path to ground and helps prevent an ESD event. Use 3 pin plug with the worktop.

Earth/Ground Lead with 3 Pin Plug

£21.08 ea
Earth/Ground Lead with 1mm ohm Resistor Earth/Ground Lead with 1mm ohm Resistor

Provides a safe path to ground to prevent an ESD event. Fitted with 1 ohm resistor to help discharge static electricity.

Earth/Ground Lead with 1mm ohm Resistor

£13.97 ea
  • Workshop Bench Kit with Static Dissipative Properties 
  • Complete Kit Form with 9 Components 
  • Powder Coated Grey Framework
  • Lamstat worktop 20mm Thick Conforms to IEC61340 Standard
  • ESD Accessories Available
  • Delivered in Knock Down Form
  • FREE Delivery to Most UK Mainland*
  • Delivery to ground floor enterancce OR Nearest off-loading point*
  • Delivery: 28-35 working days

Request Callback

Cantilever ESD Workbench Kit G - With Extension Bench comes with a practical cantilever design for maximum leg room and an additional extension bench for extra workspace. This anti static workstation has been manufactured to the highest standards. Use in an electrical workshop or factory as it has been designed specifically for static controlled areas.

The Lamstat worktop is 20mm thick and comes in grey. Charge can build up on people or tools and cause damage. Lamstat has a surface resistance of 10&sup6 - 10&sup8 ohms. Made from plastic laminate, it is also heat resistant. It conforms with IEC61340 Standard. Chemical resistance: resistant to organic solvents, weak acids, alkaline, petrol & oil. Meets requirements of EN438.

ESD Workbench Kit G Includes:

Lamstat Worktop Bench

A) Extension Bench 

B) Triple Drawer - Blue ( Other colours available please contact 3D Storage)

C) Louvered Galv Back Panel with Pin Board 

D) Uppershelf 300mm Lamstat 

E) Light / Tool Rail Suppport 

F) 3 Setting LED Light 

G) 1180mm Rear Support Posts

H) Worktop Service Ducts for 1800mm

Bench Sizes Available:

840H x 1200W x 750D 

840H x 1500W x 750D

840H x 1800W x 750D

Extension Bench Add on Sizes Available:

840H x 600W x 600D

840H x 900W x 600D

840H x 1200W x 600D

Features

  • 250kg UDL
  • Adjustable feet for total stability
  • Cantilever construction for max. leg room
  • 20mm thick Lamstat worktop
  • Powder coated light grey frame
  • Strong welded tubular frame with channel supports
  • Blue triple drawers
  • Blue cupboard
  • Louvered panel with pinboard
  • Fitted 2x4mm wrist strap sockets
  • Easy wipe clean surface
  • Wrist straps, earth/ground leads & circuit breakers available to buy but not included (lead times may be extended)
  • Delivered in knock down form
  • UK Manufactured

*Other colours availble for drawer's, however this can effect lead time please call 3D Storage for further details 

* EDS Wrist Strap NOT Included, please addon extras page

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs or into lifts. Single driver vehicle – assistance will be required for off-loading of large orders.

Code Height Width Depth
BC841275LLX 840mm 1200mm 750mm
BC841275LLX 840mm 1200mm 750mm
BC841275LLX 840mm 1200mm 750mm
BC841575LLX 840mm 1500mm 750mm
BC841575LLX 840mm 1500mm 750mm
BC841575LLX 840mm 1500mm 750mm
BC841875LLX 840mm 1800mm 750mm
BC841875LLX 840mm 1800mm 750mm
BC841875LLX 840mm 1800mm 750mm

Bench Sizes Available:

840H x 1200W x 750D 

840H x 1500W x 750D

840H x 1800W x 750D

Extension Bench Add on Sizes Available:

840H x 600W x 600D

840H x 900W x 600D

840H x 1200W x 600D

The accessories below are availble to buy after adding the product above to your basket.

RCD Circuit Breaker

RCD Circuit Breaker

RCD Circuit Breaker to use with ESD Workbenches

Wrist Strap for ESD Workbench

Wrist Strap for ESD Workbench

Wrist Strap for ESD Workbench

Earth/Ground Lead with 3 Pin Plug

Earth/Ground Lead with 3 Pin Plug

Earth/Ground Lead with 3 Pin Plug to use with ESD workbench

Earth/Ground Lead with 1mm ohm Resistor

Earth/Ground Lead with 1mm ohm Resistor

Earth/Ground Lead with 1mm ohm Resistor to use with ESD Workbenches

Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 28-35 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00. A £10.00 carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Dellivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 635155 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

});