Low 8 Door Wallet Locker by Probe

Low 8 Door Wallet Locker by Probe offers a convenient place to store keys, phones or wallets. This locker can be used in a range of environments such as gyms, reception areas, police stations, prisons and offices. It comes with a sloping top as standard to prevent litter accumulation on top of the locker. Its small, compact size at just 1000mm high means it can be situated in the smallest of spaces.

Choose from a range of powder coated paint finishes with ActiveCoat anti-bacterial protection. A range of lock options are available, camlocks with 2 keys or a hasp lock fitting (to use with a padlock) come as standard. You can add a master key or number plates and key fobs at the checkout.

Features:

1000H x 250W x 180D
Compartment Size: 90H x 192W x 180D
Single or Nest 2
Sloping top included
ActiveCoat anti-bacterial paint finish
Strong steel construction
For indoor use only
Camlocks or Hasp & Staple Locks as standard
Master key and numbering system available at checkout
Delivered ready assembled
UK Manufactured

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs or into lifts. Single driver vehicle – assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code	Height	Width	Depth
WALLET/8	1000mm	250mm	180mm

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Supplied with 2 keys
Additional keys available or easily replaced
Master Key for supervisor access available

Probe Type B Swivel Hasp & Staple Lock

Chrome swivel hasp & staple/latch lock
For use with own padlock (not included)
Keyless solution

The accessories below are availble to buy after adding the product above to your basket.

Probe Engraved Key Fob

Key fobs to attach to locker keys for locker identification.

Probe Master Key

Overrides standard locks
Controlled issue key allowing supervisor access to locked compartments
Lock type to be Lowe and Fletcher or Ronis

Probe Plastic Number Plates

Suitable for PROBE lockers
Plastic number plates with white backgrounds and black lettering
Slips neatly into plastic holder plate on locker door and reveals itself as a round disc
Ideal for locker identity

40mm Combination Padlock 3 Scroll

3 Digit Scroll Mechanical Padlock
Use in Schools, Gyms, Offices
6.3mm Shackle
Silver Body
Lightweight 110 grams

Standard Delivery Leadtime
Estimated delivery is 8-15 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £20.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

Master Key
	Probe Master Key Probe Master Key Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers. Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled access to locker compartments when either keys are lost or access required urgently.	£15.00 ea
Lock
	Probe Type A Standard Camlock Probe Type A Standard Camlock Camlocks provide added security to metal lockers, cupboards and cabinets. A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement. Users take charge of the responsibility of locking via keys (2 keys supplied with lock) Camlocks are a no cost option when purchasing lockers from 3d Lockers Choose your locking option at checkout or call us for pricing of your locker requirements. Replacement Camlocks Replacement locks and keys available by calling our sales team on 01924 240291	£0.00 ea
	Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user. The user is required to secure the locker with a padlock. This system provides flexibility particularly in schools or areas where keys could easily be lost. Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout. Chrome swivel handle with circular cut out to accomodate padlock Locker is opened by turning oval handle 90 degrees to release cam. Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm. Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291	£0.00 ea

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

Low 8 Door Wallet Locker by Probe