Use this Square Tube ESD Workbench Kit E - LED Light, Louvre Panel & Cupboard in assembly or production areas, light engineering or electronics. Use as an assembly or repair bench. The lamstat worktop prevents electrical build up and damage to any items being worked on. It has a surface resistance of 10&sup6-10 & sup8 ohms.
This general workbench will hold up to 250kg UDL - evenly distributed. It has height adjustable feet for use on uneven surfaces. It comes with a lockable single drawer and cupboard with louvered panel and pin board. The drawers are fitted on glide runners for easy movement and they easily clip in and out.
You can add additional ESD accessories at the checkout including earth/ground leads, circuit breakers and wrist straps. This workbench is delivered in knock down form for easy on-site assembly.
- Standard height is 840mm
- 750mm deep x 1220mm, 1500mm or 1800mm
- Leg in each corner to give firm support
- Height adjustable feet for easy levelling
- Powder coated light grey framework
- Single drawer with 2 keys and lockable cupboard with dark blue fronts
- Louvered panel with pin board
- 250kg UDL - evenly distributed
- 20mm thick lamstat worktop
- Easy wipe clean surface
- Delivered in knock down form for easy on-site assembly
- Additional accessories to add at checkout: RCB circuit breaker, wrist strap, earth/ground lead with 1mm ohm resistor, earth/ground lead with 3 pin plug
- UK Manufactured
*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.
Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.
Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.